Price: [price_with_discount]
(as of [price_update_date] – Details)
[ad_1]
Product Description
If you’re looking for a simple, affordable, and effective way to record music on your Mac or Windows PC, then check out the Xtreme Acoustic Audio Interface Studio 2. With Studio 2, you do not require anything fancy. This audio interface gives you everything you need in one package. Equipped with high-quality preamps for mic &Instruments and two dedicated TRS balanced outputs. The rich feature-set, which also boasts a powerful Main Output level control for the Direct Monitoring of your session. Plus the stereo/mono ports makes the XA-DIG-ST2 the best, and most-portable recording interface in its class! The ST2 provides you with a 24-bit/48kHz sampling Frequency for an amazing quality recording which your music deserves. In order to present your music for the next big thing in the music world, you will need a phenomenal partner to capture your musical ideas. That’s where the XA-DIG-ST2 comes in. Just plug in a microphone, instrument or line-level sources to the combination 2 XLR/TRS hybrid interface for the spectacular studio sound finish. This easy-to-use interface includes a line-in instrument switch with 48V phantom power. You can gain total control of the sound through the control knob for stereo headphone output for live monitoring.
Inputs ports and preamps
Microphone/Instrument Inputs – Both channels of the AudioBox USB have Mic/ Instrument combo jacks. This convenient connector accepts either a ¼-inch phone plug or an XLR plug.
• Microphone Inputs. The XLR inputs on channels 1 and 2 are equipped with two custom microphone preamplifiers. These preamps work great with all types of microphones including dynamic, ribbon, and condenser microphones.
• Instrument Inputs. The ¼-inch TS connectors on channels 1 and 2 are for use with instruments (guitar, bass, etc.). When an instrument is plugged into the instrument input, the mic preamp is bypassed, and the AudioBox USB becomes an instrument preamplifier.
Input Gain/Trim Control. These knobs provide the following gain structure:
• XLR Microphone Instrument inputs: 40 dB of variable gain (-10 to +30 dB)
• TS ¼-inch Instrument Level inputs: 60 dB of variable gain (0 dB to +60 dB)
MIDI i/o and output ports
MIDI I/O. MIDI inputs and outputs allow connection to, and communication with, external MIDI equipment. One function of these ports is MIDI sequencing but the MIDI protocol can be used for much more than instruments and sequencing.
Phones output – ¼-inch Phones (headphone) jack. This is where you connect headphones to your AudioBox USB for real-time monitoring.
Main Out. These are the main outputs for the AudioBox USB. The output level of the Main Outs is controlled by the Main volume knob on the front of the unit.
USB Port. This is where you connect the USB cable from your AudioBox USB to your computer. The AudioBox USB is bus-powered via this connection and does not require an external power supply.
Technical specifications
Microphone Preamp
Type Combo, XLR, female, balanced Mic Preamp EIN -115 dB, 20 kHz BW, max gain, Rs=40Ω, A-wtd Frequency Response 14 Hz – 70 kHz, +/- 0.3 dB, unity gain THD+N 0.008%, 0 dBu, 1 kHz, unity gain, 20 kHz BW, A-wtd S/N Ratio >95 dB, 0 dBu, 1 kHz, unity gain, 20 kHz BW, unwtd Gain Control Range 0 dB to +35 dB Input Max Headroom -3 dBu, < 0.5% THD Input Impedance 1200Ω Phantom Power +48 VDC, 10 mA total
Instrument Input
Connector Type Combo, ¼” TS, female, unbalanced Gain Control Range -30 dB to +50 dB Input Impedance 0.5 MΩ
Headphone Output
Connector Type ¼” TRS, female, stereo Maximum Power 30 mW/ch @ 60Ω load Frequency Response 20 Hz – 20 kHz, +/- 0.5 dB, max gain THD+N 0.08%, 1 kHz, max gain, 20 kHz BW, A-wtd S/N Ratio 90 dB, 1 kHz, max gain, 20 kHz BW, unwtd
Analog Outputs
Connector Type ¼” TRS, female, impedance balanced Frequency Response 20 Hz – 20 kHz, +/- 0.2 dB THD+N 0.002%, 1 kHz, 20 kHz BW, A-wtd
Digital
Host Interface USB 2.1 Bit Depth 24-bit Sample Rates 44.1 kHz, 48 kHz, Reference Level of 0dBFS +4 dBu ADC Dynamic Range 102 dB, 48 kHz sample rate, A-wtd DAC Dynamic Range 110 dB, 48 kHz sample rate, A-wtd MIDI I/O 5-pin DIN connectors
The USB audio interface features two hybrid inputs for mic and instrument, the XLR inputs are equipped with two custom power studio microphone preamplifiers that work great with all condenser, dynamic and ribbon microphones. The instrument input is a ¼ inch TS connection, when the instrument is plugged in the mic preamp is bypassed and USB audio becomes an instrument preamplifier.
MIDI I/O(5-pin DIN connectors) allows connection to, and communicate with, external MIDI equipment. One function of these ports is MIDI sequencing but the MIDI protocol can be used much more than instruments and sequencing.
48kHz/24-bit achieves high-quality audio reproduction for contemporary music and producers. Equipped with 48v phantom power for condenser microphone.(don’t enable 48v phantom power while using ribbon microphone)
Driver software included which comes in a CD, plug the device and then install the driver software.
[ad_2]